Trash Barrel Sticker Set - CAPTAIN TRASH

Trash Barrel Sticker - "PimpYourTrashBarrel"

Always on the clean side with CleanU - now in the household too.
With the clever Captain Trash stickers, filling your rubbish bins is easier, funnier and at the same time your bin will be visually pimped!

Scope of delivery
5 x sticker dimensions "big": 98 x 420 mm
(1 each for residual waste/glass/packaging/paper/biowaste)

Small instructions for applying your sticker

1. clean the surface: The surface on which the sticker is to be applied should be free of dust and grease. Isopropyl alcohol (IPA) is best for cleaning. Alternatively, glass cleaner (without pearl effect) or a little washing-up liquid can be used. Apply some cleaner to a lint-free cloth and clean the surface until it is free of grease and dust. A good indication that the surface is free of grease is a squeaking noise when rubbing with the cloth. Do not test with your fingers, otherwise you will not have a grease-free surface again.
2. Position and fix the sticker: Place your sticker in the desired position - orientate yourself on the motif itself when positioning, not on the transfer foil or the outer cut. Use a spirit level if necessary. 3.
3. stick the sticker: Fold the sticker upwards and remove the backing paper from one side for a few centimetres. Now fold the sticker down again, holding the already exposed part so that it does not stick to the surface unintentionally. Then start to rub the exposed part flat from the inside to the outside with a squeegee or the outer edge of your hand.
Now you can gradually remove the remaining part of the backing paper and rub the sticker firmly.
Voila - have fun with your new stickers.